You are here: Home > Septic Tanks > Septic Tank Accessories > Polylok Septic Tank Accessories > Effluent Filters

Polylok PL-625 Effluent Filter - 1/32 Filtration
Enlarge Photo

PolyLok

Polylok PL-625 Effluent Filter - 1/32 Filtration

Online Price:
$328.99

 

Part Number: PL-3014-625


Weight: 20 lbs.
Ships From: CT

All Sales Final on Polylok Septic Tank Accessories.

PL-625 Effluent Filter

The PL-625 filter is ideal for grease trap applications. The 1/32” filtration has been shown to reduce fats, oils, and grease (FOG) by as much as 60% to 98%! The filter may be used in onsite wastewater systems that require a finer level of TSS removal. Whatever the application, Polylok has the filter for you!

Features

  • Rated for 10,000 GPD (Gallons Per Day)
  • 625 linear feet of 1/32" filtration slots
  • Accepts 4'' and 6'' SCHD. 40 pipe
  • Built-in Gas Deflector
  • Automatic shut-off ball when filter is removed
  • Alarm Accessibility
  • Accepts PVC extension handle

Ideal For:

  • Grease Traps
  • Laundromats
  • Dog Kennels
  • Finer level of TSS removal

The PL-625 Effluent Filter should operate efficiently for several years under normal conditions before requiring cleaning. It is recommended that the filter be cleaned every time the tank is pumped or at least every three years. If the installed filter contains an optional alarm, the owner will be notified by an alarm when the filter needs servicing. Servicing should be done by a certified septic tank pumper or installer.

Maintenance Instructions:

  1. Locate the outlet of the septic tank.
  2. Remove tank cover and pump tank if necessary.
  3. Do not use plumbing when filter is removed.
  4. Pull PL-625 out of the housing.
  5. Hose off filter over the septic tank. Make sure all solids fall back into septic tank.
  6. Insert the filter cartridge back into the housing making sure the filter is properly aligned and completely inserted.
  7. Replace septic tank cover. PL-625 Installation: Ideal for residential and commercial waste flows up to 10,000 Gallons Per Day (GPD).

Installation Instructions:

  1. Locate the outlet of the septic tank.
  2. Remove tank cover and pump tank if necessary.
  3. Glue the filter housing to the 4" or 6" outlet pipe. If the filter is not centered under the access opening use a Polylok Extend & Lok or piece of pipe to center filter.
  4. Insert the PL-625 filter into its housing.
  5. Replace the septic tank cover.

Any questions or comments please mail to info@tank-depot.com
 

Laundry Carts / Utility Carts | Tote-A-Lube Stackable Tanks | Liquid Fertilizer Tanks