Blow Molded Applicator Tanks
-These tanks feature four injection-molded leg inserts which allow the tanks to be fastened with common
5/16" bolt & washer.
-Furnished with a 5" vented lid and lanyard assembly, outlet cap, tether and gasket.
-The tanks are furnished with a threaded outlet drain and cap on one end and a utility port on the side
opposite the wand clip mounting inserts. The port is closed until drilled open by the customer. Optional
locations for the utility port are available.
-One end of the tank features sump flat that will accept up to 1/2" bulkhead fitting.
-Bottom channel sump promotes fluid drain-out.