47 Gallon L-Shape Refueling Tank
The L-Shape refueling tank was designed to be used with an existing toolbox. The toolbox pad on the L-Shape fits under most standard toolboxes. The fuel tank can also be installed in reverse so the fuel tank can be removed without removing the toolbox. The two-2” bungs allow for reversing the fuel fill cap and fuel transfer pump to the side you prefer best. Tank Features include:
- Special Permit issued by the U.S. Department of Transportation
- Legal for Gas, Diesel, Methanol, Kerosene, Aviation fuel and other liquids
- Commercial grade lockable vent/prevent filler cap
- Fully baffled to reduce movement of contents
- Two-2” NPT reinforced bungs for superior strength
- 3/8” NPT drain
- Hold down brackets
- Pressure and leak detection test
- Clean and free of debris inside and outside of the tank
- 1 year limited warranty
0 Gallon L-Shape Refueling TankThe L-Shape aluminum auxiliary tank were designed to be used with an existing toolbox. The toolbox pad on the L-Shape fits under most standard toolboxes. The fuel tank can also be installed in reverse so the fuel tank can be removed without removing the toolbox. The two-2” bungs allow for reversing the fuel fill cap and fuel transfer pump to the side you prefer best.
- Tank Features include:
- Special Permit issued by the U.S. Department of Transportation
- Legal for Gas, Diesel, Methanol, Kerosene, Aviation fuel and other liquids
- Commercial grade lockable vent/prevent filler cap
- Fully baffled to reduce movement of contents
- Two-2” NPT reinforced bungs for superior strength
- 3/8” NPT drain
- Hold down brackets
- Pressure and leak detection test
- Clean and free of debris inside and outside of the tank
- 1 year limited warranty
Notes: Mounting tabs extend out 1-½" and add 2-½" for cap height