Pump Switch 30PMD1WP
Mechanically-activated, wide-angle switch designed for direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC. OPTIONS This switch is available: • for pump down or pump up applications as specified by part number. • with a 120 VAC or 230 VAC piggy-back plug. • without a plug for direct wiring in 120 VAC or 230 VAC applications. • in standard cable lengths of 10, 15, 20, or 30 feet and 3, 5, 6, or 10 meters (longer lengths available). Pump Down / OFF position This mechanically-activated, wide-angle pump switch provides automatic control of pumps in: • water • sewage applications The SJE PumpMaster® pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.
Heavy-duty contacts. • Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC. • Adjustable pumping range of 7 to 36 inches (18 to 91 cm). • Includes standard mounting clamp and boxed packaging. • UL Recognized for use in non-potable water and sewage. • CSA Certified. • Five-year limited warranty.
CABLE: flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE) FLOAT: 3.05 inch diameter x 3.56 inch long (7.75 x 9.04 cm) high impact, corrosion resistant, PVC housing for use in sewage and water up to 140°F (60°C) ELECTRICAL: 120 VAC 50/60Hz Single Phase: Maximum Pump Running Current: 13 amps Maximum Pump Starting Current: 85 amps Recommended Pump HP: 1/2 HP or less 230 VAC 50/60Hz Single Phase: Maximum Pump Running Current: 13 amps Maximum Pump Starting Current: 85 amps Recommended Pump HP: 1 HP or less NOTE: This switch must be used with pumps that provide integral thermal overload protection.