Tank Alert High Level
TA EZ 120V, High, 4.57m SJE SignalMaster
Innovative, indoor or outdoor liquid level alarm system. This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications. The Tank Alert® EZ indoor/outdoor alarm can serve as a high or low level alarm depending on the float switch model used. This easy to install alarm features an innovative, 2-color molded enclosure. The top half of the enclosure is translucent and illuminates red when an alarm condition occurs.
2-color molded enclosure offers a distinct look; upper translucent half illuminates in alarm condition • Removable lower cover provides greater access for easier field wiring while the internal circuitry remains protected • Interlocking enclosure features unique sound chamber to amplify the horn, while helping prevent moisture from entering • External mounting tabs for easy installation • Enclosure meets Type 3R water-tight standards • Enclosure has indicator marks on bottom for easy placement of cord entry locations • Automatic alarm reset, horn silence switch, and alarm test switch • Alarm horn sounds at 82 decibels at 3 meters (10 feet) • Alarm system (when installed on separate circuit) operates even if pump circuit fails • Green power on indicator • Includes auxiliary alarm contacts for easy attachment of remote devices • Complete package includes standard SJE SignalMaster® control switch with 4.57 meters (15 feet) of cable (other lengths available) and mounting clamp • CE Certified units available upon request
Voltage: 120 VAC Model: Primary: 120 VAC, 50/60 Hz, 3.8 watts max. (alarm condition) Secondary: 9 VDC 240 VAC Model: Primary: 240 VAC, 50/60 Hz, 3.8 watts max. (alarm condition) Secondary: 9 VDC Alarm Enclosure: 17.02 x 13.46 x 6.35 cm (6.7 x 5.3 x 2.5 inch), indoor-outdoor, weatherproof, thermoplastic meets Type 3R water-tight standard Alarm Horn: 82 decibels at 3 meters (10 feet) Auxiliary Alarm Contacts: 240 VAC / 30 VDC, 1.5 amps max., 50/60 Hz (circuit not supervised) Pre-mounted Terminal Block (optional): rated for 20 amps, 120/240 VAC Power Cord (optional - 120V Model only): 1.8 meter (6 foot) cord with 120 VAC North American plug Float Switch: SJE SignalMaster® control switch with mounting clamp Cable: 4.57 meters (15 feet), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE) Float: 7 cm diameter x 12.3 cm long (2.74 x 4.83), high impact, corrosion resistant polypropylene housing for use in sewage and non-potable water up to 140°F (60°C) Maximum Water Depth: 9 meters (30 feet), 13 PSI Electrical: 5 amps, 125 VAC/250 VAC, 50/60 Hz