WASTEFLOW PC 16mm / 0.5gph / 12" spacing with ROOTGUARD & GeoShield - 500 ft roll

Manufacturer Part

Accuracy of the images may vary. Refer to the specifications table to ensure precision.

The dripline consist of nominal sized one-half inch linear low density polyethylene tubing, with turbulent flow drip emitters bonded to the inside wall. The drip emitter flow passage shall be 0.032” x 0.045” square. The tubing shall have an outside diameter (O.D.) of approximately .64-inches and an inside diameter (I.D.) of approximately .55-inches. The tubing shall consist of three layers; the inside layer shall be Geoshield® protection, the middle layer shall be black and the outside layer shall be purple striped for easy identification. The dripline shall have emitters regularly spaced 24” (or 18” or 12”) apart. The pressure compensating emitters shall be molded from virgin polyethylene resin with a silicone rubber diaphragm. The pressure compensating emitters shall have nominal discharge rates of 1.02 gallons per hour. The emitters shall be impregnated with Treflan® to inhibit root intrusion for a minimum period of fifteen years and shall be guaranteed by the manufacturer to inhibit root intrusion for this period. 1.02 gph
Technical Drawings
View Product PDF

Key Specs
Length 24"
Width 1"
Height 1"
Manufacturer Geoflow
Manufacturer Part Number WFPC16-2-12
Shipping Height 1"
Shipping Length 24"
Shipping Weight 18lbs
Shipping Width 1"
Ship Class UPS