JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Best Freight Rates Every Time!

Compare Products

Home
Fuel and Oil Tanks
Stackable
Tank Systems

Tank Systems - 1.9 (Max 15.87 lbs/gal) - 1.9

The All-in-One Solution: Pre-Configured Multi-Fluid Gravity Feed Systems
You're beyond deciding on a single tank, you need a complete fluid dispensing system that can be installed and operational immediately. Piecing together stands, valves, fittings, and drip trays takes time, introduces complexity, and increases the chance of error. Your shop needs a professional, turnkey setup for bulk lubricants and oils, not a DIY project....

This is why Tank Depot offers pre-configured Multi-Fluid Gravity Feed Systems. These are not just stacks of tanks; they are complete stackable lube systems from trusted brands like Fluidall and Snyder, delivered with everything needed for safe, clean, and instant bulk fluid management. With systems ranging from 35 to 500 gallons of total capacity, you can eliminate the headaches of traditional storage and immediately transition to an optimized, high-efficiency lube bay setup.

Multi-Gravity Feed System Benefits: Ready to Install, Ready to Perform

When you purchase a pre-configured stackable lube system, you are buying speed, efficiency, and guaranteed compatibility. These systems are designed to eliminate the common barriers to upgrading your shop, offering an immediate return on investment.

Single SKU Convenience

The greatest advantage of a Tank Depot stackable lube system is buying one SKU that delivers everything. You receive the poly tanks, the sturdy steel stand with 24-inch legs, the drip tray assembly, and the full bulk fluid dispensing kit—including brass valves and all necessary fittings. This eliminates the hassle of fragmented purchasing and ensures all components are perfectly matched and ready for assembly.

Massive Fluid Capacity, Minimal Footprint

Our systems are available in total capacities ranging from 70 gallons (2x 35-gallon Tote-A-Lube tanks) up to a massive 500 gallons total volume, often packaged within the standard 36" x 36" Cubetainer footprint. This allows you to purchase fluids in quantities that generate real cost savings, all while optimizing your shop space vertically instead of horizontally.

Multi-Fluid Versatility

These multi-fluid gravity feed systems are built to house five or more different Class IIIB fluids—from engine oil and hydraulic fluid to ATF and antifreeze—in dedicated, clearly labeled tanks. This segregation is critical for preventing cross-contamination and maintaining the purity of expensive lubricants.

Robust, Industrial-Grade Construction

Systems are built using either Fluidall Tote-A-Lube tanks or Snyder Cubetainer tanks, both featuring seamless, high-density polyethylene construction. The steel stands are engineered for stability under full load, supporting the entire system from the compact 35-gallon setups to the heavy-duty 500-gallon cylindrical systems.

Integrated Level Management

The translucent walls and molded-in level indicators of the poly tanks allow for instant visual checks, making inventory management simple. You know exactly when it is time to schedule your next bulk fluid delivery, keeping your maintenance operations running without interruption.

The Gravity Feed Difference: Clean, Reliable, and Simple

When dispensing high-volume fluids in a fast-paced environment, simplicity equals reliability. While pumps have their place, the Gravity Feed System provides a proven, robust, and cost-effective method for daily fluid dispensing that reduces potential downtime and maintenance costs.

Effortless Dispensing

Unlike costly pump-driven systems that require electricity, our multi-fluid gravity feed systems use the natural force of gravity, combined with the height of the steel stand, to dispense fluids efficiently. This translates to zero electrical components to maintain, repair, or replace.

Precision and Control

The complete system includes high-quality dispensing components, such as durable 316 stainless steel valves or brass spring valves. These components provide the technician with clean, reliable, and drip-free control over the fluid stream, ensuring accurate measurements and preventing wasteful spills onto your shop floor.

Contamination Control

Every pre-configured system includes a dedicated drip tray assembly mounted directly beneath the dispensing valves. This is a non-negotiable feature that keeps your service area clean, minimizes slip hazards, and ensures compliance by capturing incidental drips immediately.

Compliance Built-In: Containment Vessels for SPCC Peace of Mind

110% Containment, Zero Stress

Some of our systems, particularly the Slimtainer and Cubetainer configurations, are available with an optional 110% containment vessel (or spill pallet). That means the system provides a safety barrier capable of holding 110% of the largest tank's volume, satisfying critical SPCC compliance guidelines without any guesswork.

A Clean, Dry System

Beyond regulatory compliance, the included drip tray kits and containment vessels keep your expensive fluids protected and your shop floor dry. This eliminates the rust, grime, and environmental mess typically associated with storing fluids in metal drums or on standard warehouse pallets.

The Polyethylene Advantage, Reinforced

Because every component that touches the fluid, including the tank itself, is made of seamless, high-density polyethylene, you eliminate all risk of rust or corrosion that can contaminate your specialized oils and fluids. This integrity is vital for protecting high-performance engines and machinery.

Why Choose a Tank Depot Gravity Feed Fluid Dispensing System?

Your focus should be on servicing vehicles, not managing hardware. Choosing a complete oil dispensing system from Tank Depot means you are leveraging our expertise in fluid management to maximize your profitability and reduce your liability.

Engineered Compatibility

When you buy a complete multi-fluid gravity feed system, you remove all risk of part incompatibility. Every component, from the stackable lube tanks and stand to the 316 stainless steel valves and drip tray, is guaranteed to work together perfectly, saving your crew precious installation time.

True Bulk Savings

The primary financial benefit is the ability to easily handle massive total capacities (up to 500 gallons), allowing you to consistently purchase fluids at true bulk rates. This single, high-volume investment immediately reduces your per-gallon cost.

Design Expertise

Whether you need the standard footprint of a Cubetainer System or the narrow design of a Slimtainer with an optional 110% containment basin, we offer the specific pre-configured solution to fit your unique shop constraints and fluid volume demands.

Shop Complete Fluid Gravity Feed Systems from Tank Depot

Stop spending time and money piecing together incomplete fluid setups that compromise your shop floor and your regulatory status. Our pre-configured stackable lube systems offer a total, professional solution for managing oil, DEF, ATF, and lubricants, all while delivering cost savings and freeing up valuable floor space.

Ready to implement a high-efficiency lube system today? Browse our complete selection of Multi-Fluid Gravity Feed Systems below to find the system capacity that optimizes your operation. If you require a custom configuration or a quick quote on a large order, contact our experts.

Capacity	Name	Diameter	Length	Width	Height	SKU	Price
240 Gallons	Snyder Industries 120/120 Gallon Slimtainer Gravity Feed System with Containment Vessel		74	24.5	84	SII-1035700N95403	$1,972.00
320 Gallons	Snyder Industries Snyder Industries 320 Gallon Plastic Stackable Tanks, 80/120/120 Gallon Cubetainer Tanks		36	36	100.5	SII-1036700N95401	$1,843.00
360 Gallons	Snyder Industries 360 Gallon Cylindrical Gravity Feed Tank System		52.3	65	83.1	SII-5760100N97208	$2,244.00
440 Gallons	Snyder Industries 440 Gallon Plastic Gravity Feed Tank System	53	53	53	69	SII-5770100N97208	$2,686.00
500 Gallons	Snyder Industries 500 Gallon Plastic Gravity Feed Tank System		60	66	101	SII-5780100N97208	$2,928.00