866-926-5603
We Will Beat ANY PRICE

Shop Products

  • EZ CONNEX3 WIDE-ANGLED VERSIONS 10MAPWCWNOEZ
  • EZ CONNEX3 WIDE-ANGLED VERSIONS 10MAPWCWNOEZ

EZ CONNEX3 WIDE-ANGLED VERSIONS 10MAPWCWNOEZ

Online Price:
$61.00

 

Part Number: SJE-1054147

Size: 2.74"D x 4.83"L
Ship Weight: 2.44 lbs.
Product Weight: 0.5 lbs.

Ships From: MN
Call for Shipping Rate 866-926-5603 or Email 

Specification Sheet 
Specification Sheet 
Specification Sheet 
Specification Sheet 
Installation Guide 
Installation Guide 

Revolutionary Float Switch Connection System Saves Installers Time and Money

 

Features

  • (3) Quick release float connection ports
  • A single 6 conductor direct burial cable with shield
  • Housing is imprinted with R-B-Y that matches Red-Blue-Yellow cable wire pairs for easy float identification
  • Rated for short term water submersion
  • Includes mounting bracket with hardware
  • Designed for use with EZconnex® float switches (not included with manifold; float switches must be ordered separately):
    • Low current applications down to 0.160 mA at 125V
    • Mechanically-activated, snap action contacts
    • Quick release float connection simply plugs into manifold port(s)
    • Colored caps for easy identification of Normally Open (blue cap) or Normally Closed (red cap) models
    • Activation angle above/below horizontal:
    • 4? (10.16 cm) wide-angle; 1.5? (3.81 cm) narrow-angle
    • Each float switch includes a protective rubber boot that provides a dual seal design for an extra layer of protection to keep connections clean and dry

Manifold Options:

  • Standard cable lengths of 25, 50, or 100 ft (7.62, 15.24, or 30.48 m).
  • Sealing plug (includes rubber boot) required for unused port(s).

Float Switch Options:

  • Standard cable lengths of 5, 10, or 20 ft (1.52, 3.05, or 6.10 m).
  • Blue cap for normally open (high level) applications or red cap for normally closed (low level) applications.
  • With narrow or wide-angle pumping ranges.
  • Two float mounting configurations available:
    • Mounting Clamp: for applications where the switch can be attached

to a float tree or similar mounting device.

    • Cable Weight: includes clip-on cable weight; floats should be hung

from a hanger bracket (ordered separately)

NOTE: do not suspend floats directly from manifold.

CSA Certified

Five-year limited warranty

Specifications

MANIFOLD SPECIFICATIONS:

  • Cable: Direct Burial Shielded PVC Type TC-ER TFFN (UL) 600V 18 gauge, 6 conductor

HOUSING: ABS Plastic

ELECTRICAL:

  • 125 VAC
    • Maximum Electrical Load:
    • 1 amp per connection port

FLOAT SPECIFICATIONS:

  • CABLE: flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
  • FLOAT: 2.74 inch diameter x 4.83 inch long (7.0 cm x 12.3 cm), high-impact, corrosion resistant, polypropylene housing for use in sewage and water up to 140°F (60°C)
  • MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 PSI (90kPa)

ELECTRICAL:

  • 125 VAC
    • Maximum Electrical Load:
    • 1 amp, Minimum Electrical Load: 0.160 milliamps
  • 30 VDC
    • Maximum Electrical Load:
    • 1 amp, Minimum Electrical Load: 0.160 milliamps
  • 5 VDC
    • Minimum Electrical Load:
    • 1 milliamp

 

5 YEARS WARRANTY