Bailiff 2 Inch Polypropylene Bulkhead - Installed

Bailiff 2 Inch Polypropylene Bulkhead - Installed

Screw on polypropylene bulkhead with EPDM gasket offers safe, quick pipe connections for standard wall plastic tanks. We use Banjo Corporation bulkheads or their equivalent for our polypropylene bulkheads. They are rated to 150 PSI. They offer left hand threads on the tightening ring to keep from loosening.
-- The bulkheads are double threaded so internal piping or siphon tubes can be easily attached.. The bulkheads use Nation Pipe Threads (NPT).
-- These bulkheads are all available with EPDM, FPM (Viton) or Buna gaskets. Other gasket materials may optionally be sourced. 

When connecting threaded fittings, be sure to use Teflon (PTFE) impregnated plumbers paste rather than Teflon tape. Teflon tape can bunch up an cause a fitting to crack. Be careful not to over tighten pipes connecting to the bulkheads.