1010 Gallon Horizontal Leg Tank with Sump Bottom

SKU
N-40393
Manufacturer Part
40393
$2,414.00
ADD-ONS We suggest these additional items.

With the broadest leg tank line available, Norwesco manufactures a size that will fit your needs. Used primarily for transport and nursing applications, Norwesco's leg tanks feature molded-in legs that act as "baffles" to reduce sloshing.

Accuracy of the images may vary. Refer to the specifications table to ensure precision.

1010 Gallon Plastic Horizontal Leg Tank with Sump Bottom

A white portable horizontal tank. It's primarily used for the storage and transportation of water and chemicals. This leg tank is used in a variety of industries such as construction, manufacturing, agriculture, fire suppression, and pest control. It's commonly used for hauling chemicals, diesel exhaust fluid, fertilizers, and water in non-DOT applications. The tank is often used with trucks, trailers, and tractors.

  • Designed for transportation of water, fertilizer, or chemicals
  • Tank outlet provides complete drainag
  • Transparent white tank allows for easy identification of liquid levels, with gallon indicators located on the outside for convenient monitoring.
  • Full-length support and tie-downs are required to secure the tank for transportation use.
  • Constructed with durable rotationally molded polyethylene resin, ensuring resistance to cracks, chips, and ruptures for long-lasting durability.
  • Additional fittings and customization options available for tailored solutions.
  • Seamless construction complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2 for safe storage of potable water, enhanced by UV inhibitors for outdoor use.

Support Bands are required for this tank.

Band Options: Short N-60584 x 4, Long N-60585 x 4

Frequently Asked Septic Tank Questions

  1. Can I install a bruiser septic tank under a driveway?
  • No, installing the plastic bruiser septic tank under a driveway is not permitted and will void the warranty. Do not locate tanks beneath driveways or in the pathway of heavy or vehicular traffic areas.
  1. Is there a sand/gravel mixture recommended for bedding/backfill?
  • Yes, the sand/gravel mixture, commonly called “pea gravel” mixture is recommended. (See Installation Instructions Above)
  1. Can I use a septic tank above ground?
  • Underground plastic septic tanks are designed for below ground use only. Using the tanks above ground can result in deformation of the tank. It is far more cost-effective to utilize an above ground storage tank that is specifically designed for above ground use and applications.
  1. Can hot water be stored in plastic septic tanks?
  • Do not subject the tank to water temperature higher than 100 deg F. Polyethylene storage tanks have a maximum storage temperature of 120 deg F. Contents with a temperature in excess of 120 def F, even for a short period of time, can weaken the tank’s structural integrity and make it susceptible to deformation and failure.
  1. How do you access underground plastic septic tanks?
  • Each plastic septic tank comes equipped with manhole access hatches (1 or 2 depending on tank). In addition, risers can be added to the top of the tank providing ground level access. Without a riser you would need to dig up the soil above the manway to gain accessibility.
  1. Can I pick up a plastic septic tank nearby?
  • In many cases yes. To pick up a plastic septic tank and save on freight, requires you placing your order. Upon being notified that the tank is ready for pick-up, we will provide you with a 6 digit trip # which allows you go and pick up your tank M-F 8:30 am - 2:00 pm. We and the local manufacturers appreciate the opportunity to provide local pick up and the cooperation required for the process to be efficient.

Norwesco was the first polyethylene tank producer to receive NSF61 certification for potable water tanks, with certified tanks from six manufacturing facilities. Check the NSF Certification document for more details.


Key Specs
FDA Approved Yes
Gallon Capacity 1010
Gallon Indicators 1
Lid Size 16"
Max Temperature 120 F / 48 C
NSF / ANSI 61 Approved Resin MN, OH, CA
Outlet 2"
Pressurized Use No
Specific Gravity 1.5
Dimensions
Length 140"
Width 47"
Height 58"
Weight 319lbs
General
Material Polyethylene
Manufacturer Norwesco
Manufacturer Part Number 40393
Color White
Warranty 3 years
Disclaimers 2 bands required for support
Shipping Height 58"
Shipping Length 140"
Shipping Weight 319lbs
Shipping Width 47"
Ship Class LTL