| |
Name
|
Part
|
Dimensions
|
Ships From
|
Price
|
 | Geoflow 10” Air Vent Box - Commercial Grade | GEO-AVBOX-10 | | CA | $48.00 |
 | Geoflow 6” Air Vent Box - Commercial Grade | GEO-AVBOX-6 | | CA | $20.00 |
 | Geoflow Lockslip Adapter | GEO-LTSLIP-600 | | CA | $2.00 |
 | Geoflow Pre-assembled Headwork - For Riser | GEO-WHWRS-D-150A | | CA | $435.00 |
 | GeoFlow Guts & box - 1.5 in Vortex Filter, up to 45 gpm, Automatic flush | GEO-WHWS-D-1.5F-A | | CA | $1,070.00 |
 | Snyder Tamper resistant bolt kit (4 bolts; one driver bit) | SII-BOLTKIT | | NE, AR, WV | $21.99 |
 | Snyder Dominator Low Profile Tee | SII-DOMLPTEE | | NE, AR, WV | $28.99 |
 | Snyder 2" Invert Pipe | SII-INVERT2 | | NE, AR, WV | $18.99 |
| Snyder NuConSept Ribbed Tank Tee Assembly (no gasket) | SII-NCSTEE | | NE, AR, WV | $31.99 |
 | 12" Riser (12" H x 20" D)
Ships In 48 Hours | SII-RISER12 | | NE, AR, WV | $92.99 |
| Snyder Septic / cistern lid with 4" inspection port | SII-SEPLID2 | | NE, AR, WV | $109.99 |
| Snyder Septic / cistern lid with 6" inspection port | SII-SEPLID3 | | NE, AR, WV | $109.99 |
 | Snyder 4" Septic Gasket | SII-SEPTGAS$ | | NE, AR, WV | $12.00 |
 | 4 Cable Cord Seal | SJE-1008517 | | MN | $39.00 |
| 6 Cable Cord Seal | SJE-1037126 | | MN | $53.00 |
 | Simplex Installation Kit | SJE-1038029 | | MN | $56.77 |
 | Duplex Installation Kit | SJE-1038030 | | MN | $79.00 |
 | 3" Tigre DWV Stop Coupling | TIG-100-3191 | 3" X 3.26"
| WI | $1.27 |
 | 4" Tigre DWV Stop Coupling | TIG-100-3192 | 4" X 3.84"
| WI | $2.16 |
 | 4"X3" Tigre DWV Pipe Increaser Reducer | TIG-102-3207 | 4"X3"X4.35"
| WI | $3.86 |
 | 3" Tigre DWV Repair Coupling | TIG-130-3339 | 3" X 3.22"
| WI | $2.58 |
 | 4" Tigre DWV Repair Coupling | TIG-130-3340 | 4" X 3.77"
| WI | $4.95 |
 | 3" Tigre DWV 1/4 Bend | TIG-300-3357 | 6.63" X 6.53"
| WI | $2.62 |
 | 4" Tigre DWV 1/4 Bend | TIG-300-3358 | 8.24" X 8.27"
| WI | $5.17 |
 | 3" Tigre DWV Long Sweep 1/4 Bend | TIG-304-3380 | 7.62" X 7.50"
| WI | $3.36 |
 | 4" Tigre DWV Long Sweep 1/4 Bend | TIG-304-3381 | 9.30" X 9.45"
| WI | $6.36 |
 | 3" Tigre DWV 1/8 Bend | TIG-321-3403 | 3" X 6.93"
| WI | $2.35 |
 | 4" Tigre DWV 1/8 Bend | TIG-321-3404 | 4" X 8.55"
| WI | $4.29 |
 | 3" Tigre DWV 1/16 Bend | TIG-324-3418 | 3" X 5.41"
| WI | $2.31 |
 | 4" Tigre DWV 1/16 Bend | TIG-324-3419 | 4" X 6.39"
| WI | $3.63 |
 | 4" Tigre DWV Double 1/4 Bend | TIG-327-3040 | | WI | $12.58 |
 | 3" Tigre DWV Double 1/4 Bend | TIG-327-3429 | | WI | $7.30 |
 | 3" Tigre DWV Sanitary Tee | TIG-400-3465 | 7.88" X 6.61"
| WI | $3.82 |
 | 4" Tigre DWV Sanitary Tee | TIG-400-3466 | 9.87" X 8.22"
| WI | $6.98 |
 | 4"X4"X3" Tigre DWV Reducing Sanitary Tee | TIG-401-3476 | 8.57" X 5.05"
| WI | $8.17 |
 | 3" Tigre DWV Double Sanitary Tee | TIG-428-3511 | | WI | $8.21 |
 | 4" Tigre DWV Double Sanitary Tee | TIG-428-3512 | | WI | $13.20 |
 | Manhole Extension 20"Dia. x 6"H
Ships In 48 Hours | N-63514 | 20" Dia. x 6" High
| MN, OH, UT, IA, OK, GA, NY, WA, CA | $140.00 |
 | Geoflow 1” MPT kinetic air/vacuum relief valve | GEO-APVBK1 | 6"L | CA | $25.00 |
 | C-Level™ Sensor Simulator | SJE-1038326 | 36"L | MN | $235.00 |
 | 4-20mA Simulator | SJE-1039199 | 36"L | MN | $235.00 |
 | ZINC THREADED INSERT 24T 3/8" X 1" - MOQ Needed | PL-30381-24T | 1"L x 0.375"W x 1.38"H | | $2.00 |
| ZINC THREADED INSERT 25T 3/8" X 1.38" - MOQ Needed | PL-30381-25T | 1.375"L x 0.375"W x 1.38"H | | $3.00 |
| ZINC THREADED INSERT 25T OPEN BOTTOM 3/8"X1.38" - MOQ Needed | PL-30381-25T-OB | 1.375"L x 0.375"W x 1.38"H | | $3.00 |
 | BUTYL SEALANT 1/2" X 14.6' - (10 unit case) MOQ Needed | PL-3110-NS25 | 0.75"L x 0.5"W x 21"H | MO | $138.00 |
| ZINC THREADED INSERT 35T 1/2" X 1.5" - MOQ Needed | PL-30380-35T | 1.5"L x 0.5"W x 1.5"H | | $3.00 |
| ZINC THREADED INSERT 36T 1/2" X 2- 7/8" - MOQ Needed | PL-30380-36T | 2.875"L x 0.5"W x 1.5"H | | $5.00 |
| BUTYL SEALANT 1/2" X 21' - (10 unit case) MOQ Needed | PL-3110-1 | 21"L x 0.5"W | MO | $98.00 |
| ZINC THREADED INSERT 45T 5/8" X 1.69" - MOQ Needed | PL-30382-45T | 1.6875"L x 0.625"W x 1.69"H | | $4.00 |
| ZINC THREADED INSERT 46T 5/8" X 2- 7/8" - MOQ Needed | PL-30382-46T | 2.875"L x 0.625"W x 1.69"H | | $5.00 |
 | Handles - MOQ Needed | PL-3551-C | 5.17"L x 0.73"W x 4.38"H | CT | $1.00 |
| ZINC THREADED INSERT 55T 3/4" X 1-11/16" - MOQ Needed | PL-30384-55T | 1.6875"L x 0.75"W x 2.88"H | | $4.00 |
| ZINC THREADED INSERT 56T 3/4" X 2.88" - MOQ Needed | PL-30384-56T | 3"L x 0.75"W x 2.88"H | | $7.00 |
| BUTYL SEALANT 3/4" X 14.6' - (10 unit case) MOQ Needed | PL-3110-4 | 14.6"L x 0.75"W | MO | $108.00 |
| BUTYL SEALANT 3/4" X 21' (9 unit case) - MOQ Needed | PL-3110-2 | 21"L x 0.75"W | MO | $124.00 |
| BUTYL SEALANT 3/4" X 27" (10 unit case) - MOQ Needed | PL-3110-NS9 | 27"L x 0.75"W | MO | $160.00 |
 | BAFFLE GAS DEFLECTOR - MOQ Needed | PL-3023 | 11"L x 1"W x 7.66"H | | $11.00 |
| BUTYL SEALANT 1" X 21' - (6 unit case) MOQ Needed | PL-3110-3 | 21"L x 1"W | MO | $132.00 |
| WASTEFLOW PC 16mm / 0.5gph / 12" spacing with ROOTGUARD & GeoShield - 500 ft roll | GEO-WFPC16-2-12 | 24"L x 1"W x 1"H
| CA | $300.00 |
| WASTEFLOW PC 16mm / 0.5gph / 24" spacing with ROOTGUARD & GeoShield - 500 ft roll | GEO-WFPC16-2-24 | 24"L x 1"W x 1"H
| CA | $270.00 |
 | WASTEFLOW PC 16mm / 1gph / 12" spacing with ROOTGUARD & GeoShield - 500 ft roll | GEO-WFPC16-4-12 | 24"L x 1"W x 1"H
| CA | $300.00 |
 | WASTEFLOW PC 16mm / 1gph / 24" spacing with ROOTGUARD & GeoShield - 500 ft roll | GEO-WFPC16-4-24 | 24"L x 1"W x 1"H
| CA | $270.00 |
 | HANDLE EXTENSION KIT - One Unit | PL-A1801-HEK | 3"L x 1.04"W x 1.22"H | CT | $15.00 |
 | SLAB BOLSTER WITH RUNNERS 44" X 1" COVER - MOQ Needed | PL-3062-1 | 44"L x 1.05"W x 1"H | | $5.00 |
 | SUMP GRATES 13" X 13" - MOQ Needed | PL-3037 | 13"L x 1.31"W x 13"H | CT | $30.00 |
| SLAB BOLSTER WITH RUNNERS 44" X 1-1/2" COVER - MOQ Needed | PL-3062-15 | 44"L x 1.44"W x 1.5"H | CT | $4.00 |
| ZINC THREADED INSERT 15T 1/4" X 1.5" - MOQ Needed | PL-30383-15T | 0.25"L x 1.5"W x 1"H | | $2.00 |
 | POSTS (FOR LARGE FORM CLAMP) - One Unit | PL-3043 | 2.5"L x 1.5"W x 1.88"H | CT, CT | $27.00 |
| FLUSH RECEIVER WARNING-2COMPT - MOQ Needed | PL-3047-REC | 6.12"L x 1.54"W x 6.12"H | CT | $2.00 |
 | MARTFILTER SWITCH ONLY 15' CORD - One Unit | PL-3014B | 1"L x 1.58"W x 6.4"H | CT | $131.00 |
 | CAST IRON RAIN DRAIN GRATE 8-1/2 X 13-1/8 - One Unit | PL-3035-1 | 13.05"L x 1.58"W x 8.5"H | CT | $103.00 |
| PLASTIC RAIN DRAIN GRATES 8-1/2" X 13-1/8" - MOQ Needed | PL-3035 | 13.3"L x 1.58"W x 8.74"H | CT | $23.00 |
| Pocket Former (Small) - One Unit | PL-3019-S | 4.52"L x 1.62"W x 6.75"H | CT | $60.00 |
| Pocket Former (Small) Urethane - One Unit | PL-3019-SU | 4.52"L x 1.62"W x 6.75"H | CT | $71.00 |
| FORM CLAMPS 10" W/STRAIGHT ARM - One Unit | PL-3042-10S | 10"L x 1.75"W x 1.5"H | CT | $81.00 |
| SLAB BOLSTER WITH RUNNERS 44" X 2" COVER - MOQ Needed | PL-3062-2 | 44"L x 1.85"W x 2"H | CT | $5.00 |
 | 3/4" PYRAMID WIRE CLIPS - MOQ Needed | PL-3057-75 | 2"L x 2"W x 0.75"H | | $1.00 |
| 1" PYRAMID WIRE CLIPS - MOQ Needed | PL-3057-1 | 2"L x 2"W x 1"H | | $1.00 |
| 1.25" PYRAMID WIRE CLIPS - MOQ Needed | PL-3057-125 | 2"L x 2"W x 1.25"H | | $1.00 |
| 1.5" PYRAMID WIRE CLIPS - MOQ Needed | PL-3057-15 | 2"L x 2"W x 1.5"H | | $1.00 |
| 2" PYRAMID WIRE CLIPS - MOQ Needed | PL-3057-2 | 2"L x 2"W x 2"H | | $1.00 |
| FORM CLAMPS 15" W/BENT ARM - One Unit | PL-3042 | 19.09"L x 2"W x 4.71"H | CT, CT | $101.00 |
 | EQUALS KNOCKOUTS/NARROW STYLE - One Unit | PL-30441 | 6.43"L x 2.02"W x 2.8"H | CT | $44.00 |
| SLAB BOLSTER WITH RUNNERS 44" X 2-1/2" COVER - MOQ Needed | PL-3062-25 | 44"L x 2.26"W x 2.5"H | CT | $5.00 |
 Stackable Bolsters_100.jpg) | SLAB BOLSTER 44" X 3/4" COVER (STACKABLE) - MOQ Needed | PL-3063-L75 | 44"L x 2.37"W x 0.75"H | CT | $3.00 |
| SLAB BOLSTER 44" X 1" COVER (STACKABLE) - MOQ Needed | PL-3063-L1 | 44"L x 2.37"W x 1"H | CT | $3.00 |
| SLAB BOLSTER 44" X 1-1/4" COVER (STACKABLE) - MOQ Needed | PL-3063-L125 | 44"L x 2.37"W x 1.25"H | CT | $3.00 |
| SLAB BOLSTER 44" X 1-1/2" COVER (STACKABLE) - MOQ Needed | PL-3063-L15 | 44"L x 2.37"W x 1.5"H | CT | $4.00 |
| SLAB BOLSTER 44" X 1-3/4" COVER (STACKABLE) - MOQ Needed | PL-3063-L175 | 44"L x 2.37"W x 1.75"H | CT | $4.00 |
| SLAB BOLSTER 44" X 2" COVER (STACKABLE) - MOQ Needed | PL-3063-L2 | 44"L x 2.37"W x 2"H | CT | $4.00 |
| SLAB BOLSTER 44" X 2-1/4" COVER (STACKABLE) - MOQ Needed | PL-3063-L225 | 44"L x 2.37"W x 2.25"H | CT | $4.00 |
| SLAB BOLSTER 44" X 2-1/2" COVER (STACKABLE) - MOQ Needed | PL-3063-L25 | 44"L x 2.37"W x 2.5"H | CT | $4.00 |
| SLAB BOLSTER 44" X 2-3/4" COVER (STACKABLE) - MOQ Needed | PL-3063-L275 | 44"L x 2.37"W x 2.75"H | CT | $4.00 |
| SLAB BOLSTER 44" X 3" COVER (STACKABLE) - MOQ Needed | PL-3063-L3 | 44"L x 2.37"W x 3"H | CT | $5.00 |
| LARGE CLAMP HEAVY DUTY 22" - One Unit | PL-3042-HD | 27"L x 2.5"W x 4.16"H | CT, CT | $246.00 |
| SLAB BOLSTER WITH RUNNERS 44" X 3" COVER - MOQ Needed | PL-3062-3 | 44"L x 2.66"W x 3"H | CT | $5.00 |
 | 1/16” SHIM - MOQ Needed | PL-3065-SH116 | 2.76"L x 2.76"W x 0.08"H | | $1.00 |
| 1/8" SHIM - MOQ Needed | PL-3065-SH118 | 2.76"L x 2.76"W x 0.12"H | | $1.00 |
| 3/16" SHIM - MOQ Needed | PL-3065-SH316 | 2.76"L x 2.76"W x 0.2"H | CT | $2.00 |
| 3/8" SHIM - MOQ Needed | PL-3065-SH318 | 2.76"L x 2.76"W x 0.4"H | | $3.00 |
 | VIPER-LOK (FLAT) - MOQ Needed | PL-3070 | 2.32"L x 2.85"W x 1.64"H | | $2.00 |
| VIPERLOK WITH 1" STANDOFF - MOQ Needed | PL-3070-1 | 2.32"L x 2.85"W x 1.64"H | | $2.00 |
| VIPERLOK WITH 1-1/2" STANDOFF - MOQ Needed | PL-3070-15 | 2.32"L x 2.85"W x 1.64"H | | $2.00 |
| VIPERLOK WITH 2" STANDOFF - MOQ Needed | PL-3070-2 | 2.32"L x 2.85"W x 1.64"H | | $2.00 |
| Pocket Former (Large) - One Unit | PL-3019-L | 5.68"L x 3"W x 8.5"H | CT | $87.00 |
 | Extend & Lok 3" - MOQ Needed | PL-30131-TL | 8.52"L x 3.51"W x 8.52"H | CT | $43.00 |
 | SUMP FORM MOLD (13x13) - One Unit | PL-3037-2 | 13.25"L x 4"W x 13.25"H | | $412.00 |
| UNEQUAL KNOCKOUT OLD STYLE - One Unit | PL-3044 | 6.06"L x 4.13"W x 2.78"H | CT | $44.00 |
 Corner Guard_100.jpg) | Corner Guard - MOQ Needed | PL-3066 | 5.08"L x 4.25"W x 3.65"H | CT | $3.00 |
 | Extend & Lok 4" - MOQ Needed | PL-30130-TL | 8.57"L x 4.52"W x 8.57"H | CT | $43.00 |
 | 12"x12" Square Riser - One Unit | PL-PDB-4PE | 4.85"L x 4.85"W x 1.5"H | CT | $19.00 |
 | Auto Dialer | SJE-1012019 | 4"L x 6"W x 1.5"H | MN | $572.00 |
| Auto Dialer w/Home Temperature Monitor | SJE-1012103 | 4"L x 6"W x 1.5"H | MN | $627.00 |
| Auto Dialer 4X | SJE-1024803 | 4"L x 6"W x 1.5"H | MN | $1,205.00 |
 | Service Weight or Schedule 40 Gasket Kit (2 ea) - (#61765)
Ships In 48 Hours | N-61765 | 6"L x 6"W x 6"H | IA | $15.00 |
 | Aluminum Form Hammer - One Unit | PL-3100 | 6"L x 6"W x 18"H | CT | $114.00 |
 | Panel Mounting Post | SJE-1038027 | 7"L x 6"W x 34"H | MN | $122.00 |
 | Polylok Gas Flap For PL-68 - One Unit | PL-3025 | 7.01"L x 6"W x 4.17"H | CT, CT | $7.00 |
 | Gas Flap Deflector For SCHD 40" & SDR 35" Pipe - One Unit | PL-3025-S | 7.01"L x 6"W x 4.17"H | CT | $7.00 |
 | POLYLOK AIR VENT - One Unit | PL-PCF-PLV | 6.3"L x 6.3"W x 3.17"H | CT | $38.00 |
 | Extend & Lok 6" - One Unit | PL-30132-TLE | 9.48"L x 6.65"W x 9.48"H | CT | $69.00 |
 | Polylok UV Disinfection Unit - One Unit | PL-UV1 | 7"L x 7"W x 62.51"H | CT, CT | $1,296.00 |
 | HOUSING FOR PL-68 3"/4" - One Unit | PL-30142-68 | 22.04"L x 7.04"W x 22.04"H | CT | $23.00 |
 | GAS DEFLECTOR FOR PL-250 - One Unit | PL-3026-GD | 9.33"L x 8"W x 5.64"H | CT | $13.00 |
| MOLD-RAIN DRAIN (STEEL) - One Unit | PL-3032 | 15.75"L x 11.13"W x 9.75"H | | $2,841.00 |
 | PIPE ADAPTER REDUCER BUSHING SCH40 TO SDR35 - One Unit | PL-30142-R | 11.5"L x 11.5"W x 2"H | | $2.00 |
| BEARING PAD - MOQ Needed | PL-3065 | 21.2"L x 15.95"W x 0.44"H | CT | $13.00 |
 | Programmable Logic Controller for single zone 230 VAC Duplex Pump | GEO-GEO1-230-DUP-AUT | 18"L x 16"W x 10"H
| CA | $1,589.00 |
 | Programmable Logic Controller for single zone 230 VAC Simplex Pump | GEO-GEO1-230-SIM-AUT | 18"L x 16"W x 10"H
| CA | $1,160.00 |
 | Two to Four zone 115 VAC Simplex Pump | GEO-GEO4-115-SIM-AUT | 18"L x 16"W x 10"H
| CA | $1,788.00 |
 | Manhole Extension 20"D x 15"H
Ships In 48 Hours | N-62397 | 24"L x 24"W x 17"H | MN, OH, UT, IA, OK, GA, NY, WA, CA | $160.00 |
 | 24" Manhole Extension
Ships In 48 Hours | N-63834 | 24"L x 24"W x 28"H | MN, OH, UT, IA, OK, GA, NY, WA, CA | $180.00 |
 | 1/2" X-Chair - MOQ Needed | PL-3061-RCX05 | 31.1"L x 31.1"W x 0.75"H | CT | $1.00 |
| 1" X-Chair - MOQ Needed | PL-3061-RCX10 | 38.9"L x 38.9"W x 1.32"H | CT | $1.00 |
| 1.5" X-Chair | PL-3061-RCX15 | 38.9"L x 38.9"W x 1.82"H | CT | $164.00 |
| 2" X-Chair - MOQ Needed | PL-3061-RCX20 | 38.9"L x 38.9"W x 2.32"H | CT | $1.00 |
 | J hook to organize excess wire | STF-JHOOK | 0.05"D x 6"H | MI | $1.10 |
 | 0.8 TON LIFT LOOP WIRE ROPE ANCHOR - One Unit | PL-3200-LL.8T | 0.25"D x 3.9375"W x 8.25"H | CT | $3.00 |
| 1.2 TON LIFT LOOP WIRE ROPE ANCHOR - One Unit | PL-3205-LL1.2T | 0.28125"D x 4.3125"W x 8.875"H | CT | $4.00 |
| 1.6 TON LIFT LOOP WIRE ROPE ANCHOR - One Unit | PL-3210-LL1.6T | 0.3125"D x 4.75"W x 9.25"H | CT | $5.00 |
| 2.5 TON LIFT LOOP WIRE ROPE ANCHOR - One Unit | PL-3215-LL2.5T | 0.375"D x 5.125"W x 11"H | CT | $7.00 |
| 3.8 TON LIFT LOOP WIRE ROPE ANCHOR - One Unit | PL-3220-LL3.8T | 0.4375"D x 5.875"W x 13.375"H | CT | $14.00 |
 | 1/2 inch Round Cable Connector (RCC-8) | SJE-1002574 | 0.5"D | MN | $9.00 |
| 1/2 inch Flat UF Cable Connector (UFCC-8) | SJE-1002576 | 0.5"D | MN | $21.00 |
| Float tree bracket fits 1/2" tree | STF-106FTB-0.50 | 0.5"D x 4.8"H | MI | $5.30 |
 | MOLD FASTENING NAILS (PLASTIC) - MOQ Needed | PL-30401 | 0.74"D x 0.74"L x 0.74"W x 1.83"H | CT | $1.00 |
| 3/4 inch Round Cable Connector (RCC-12) | SJE-1002575 | 0.75"D | MN | $14.00 |
| 3/4 inch Flat UF Cable Connector (UFCC-12) | SJE-1002577 | 0.75"D | MN | $24.00 |
 | 3/4 inch Hub Assembly | SJE-1030564 | 0.75"D | MN | $6.00 |
| 1 inch Hub Assembly | SJE-1009305 | 1"D | MN | $13.00 |
| 1 inch Round Cable Connector (RCC-16) | SJE-1009868 | 1"D | MN | $18.00 |
| Float tree bracket fits 1" tree | STF-106FTB-1.00 | 1"D x 4.8"H | MI | $5.30 |
| Float holder hard wire fits 1" pipe | STF-FHHW-1.0 | 1"D x 4.8"H | MI | $5.30 |
| Float holder piggy back fits 1" pipe | STF-FHPB-1.0 | 1"D x 4.8"H | MI | $5.70 |
 | 1/4" THREADED INSERT LOCATOR - MOQ Needed | PL-30383 | 1"D x 1"L x 1"W x 1.26"H | CT | $1.00 |
| 3/8" THREADED INSERT LOCATOR - MOQ Needed | PL-30381 | 1"D x 1"L x 1"W x 1.36"H | CT | $1.00 |
| 1/2" THREADED INSERT LOCATOR - MOQ Needed | PL-3038 | 1"D x 1"L x 1"W x 1.48"H | | $2.00 |
| 3/4"THREADED INSERT LOCATOR - MOQ Needed | PL-30384 | 1"D x 1"L x 1"W x 1.52"H | CT | $1.00 |
| 5/8" THREADED INSERT LOCATOR - MOQ Needed | PL-30382 | 1"D x 1"L x 1"W x 1.68"H | CT | $1.00 |
 | REBAR SCRATCH CAP (YELLOW) - MOQ Needed | PL-30245-F | 1.25"D x 1.57"H | CT | $1.00 |
 | Rebar Safety Identification Cap - MOQ Needed | PL-3024 | 1.25"D x 2.5"H | CT | $1.00 |
 | (Two Piece) 8 foot TruCore sludge sampler with case | STF-SLUDGE4x2 | 1.37"D x 96"H | MI | $185.00 |
| 8 foot TruCore sludge sampler with case | STF-SLUDGE8 | 1.37"D x 96"H | MI | $133.00 |
| TruCore Cleaning Brush | STF-TCBRUSH | 1.37"D x 96"H | MI | $22.00 |
| (Three Piece) 12 foot TruCore sludge sampler with case | STF-SLUDGE4x3 | 1.37"D x 144"H | MI | $252.00 |
| (Three Piece) 12 foot TruCore sludge sampler (case not included) | STF-SLUDGE4x3-NC | 1.37"D x 144"H | MI | $242.00 |
| (Four Piece) 16 foot TruCore sludge sampler (case not included) | STF-SLUDGE4x4-NC | 1.37"D x 192"H | MI | $287.00 |
| 1.5 inch Hub Assembly | SJE-1008848 | 1.5"D | MN | $19.00 |
| Float tree bracket fits 1-1/4" & 1-1/2" tree | STF-106FTB-1.25-1.50 | 1.5"D x 4.8"H | MI | $5.30 |
| Float holder hard wire fits 1/1/4" and 1-1/2" pipe | STF-FHHW-1.25-1.50 | 1.5"D x 4.8"H | MI | $5.30 |
| Float holder piggy back fits 1-1/4" and 1-1/2" pipe | STF-FHPB-1.25-1.50 | 1.5"D x 4.8"H | MI | $5.70 |
 | 10 foot Vertical Reed Switch 120V Bulk | SJE-1011027 | 1.6"D x 6.7"L | MN | $91.00 |
| 15 foot Vertical Reed Switch 120V Bulk | SJE-1016561 | 1.6"D x 6.7"L | MN | $99.00 |
 | WHEEL CHAIR 7/8" CLIP-ON - MOQ Needed | PL-3053 | 1.98"D x 0.76"H | | $1.00 |
| 2 inch Hub Assembly | SJE-1008849 | 2"D | MN | $20.97 |
 | 1/2" GROMMET - One Unit | PL-3007-GM.50 | 2"D x 0.75"H | | $6.00 |
| Float tree bracket fits 2" tree | STF-106FTB-2.00 | 2"D x 4.8"H | MI | $6.50 |
| Float holder hard wire back fits 2" pipe | STF-FHHW-2.00 | 2"D x 4.8"H | MI | $6.00 |
| Float holder piggy back fits 2" pipe | STF-FHPB-2.00 | 2"D x 4.8"H | MI | $6.50 |
 | Sub-X™ 33.4 ftWC with 50 ft. cable | SJE-1051989 | 2"D x 5.62"L | MN | $914.00 |
| Sub-X™ 33.4 ftWC with 75 ft. cable | SJE-1051990 | 2"D x 5.62"L | MN | $1,044.00 |
| Sub-X™ 16.7 ftWC with 100 ft. cable | SJE-1051991 | 2"D x 5.62"L | MN | $1,175.00 |
| Sub-X™ 16.7 ftWC with 75 ft. cable | SJE-1051992 | 2"D x 5.62"L | MN | $1,044.00 |
| Sub-X™ 16.7 ftWC with 50 ft. cable | SJE-1051993 | 2"D x 5.62"L | MN | $914.00 |
| Sub-X™ 33.4 ftWC with 100 ft. cable | SJE-1051994 | 2"D x 5.62"L | MN | $1,175.00 |
| Sub-X™ 16.7 ftWC with 25 ft. cable | SJE-1051995 | 2"D x 5.62"L | MN | $749.00 |
| Sub-X™ 33.4 ftWC with 25 ft. cable | SJE-1051996 | 2"D x 5.62"L | MN | $749.00 |
 | Riser Mounting Kit (2 inch) | SJE-1038262 | 2"D x 6"L | MN | $54.00 |
| Riser Mounting Kit (2.5 inch) | SJE-1053756 | 2"D x 6"L | MN | $69.00 |
 | 1" REBAR MESH CHAIR (MESH-UPS) - MOQ Needed | PL-3060-TMC100 | 2.03"D x 2.03"L x 2.03"W x 1.78"H | CT | $1.00 |
 | INSPECTION TAGS (ORANGE) - MOQ Needed | PL-3047-S | 2.24"D x 2.24"L x 2.24"W x 0.91"H | CT | $1.00 |
| 3/4" Grommet - One Unit | PL-3007-GM.75 | 2.25"D x 0.75"H | CT | $7.00 |
 | REBAR END SPACER (GREY) - MOQ Needed | PL-30245 | 2.28"D x 2.01"H | | $1.00 |
| 2" GROMMET - One Unit | PL-3007-GM2 | 2.3"D x 0.75"H | | $11.00 |
| 1" PUSH-ON WHEEL CHAIR - MOQ Needed | PL-3052 | 2.3"D x 0.76"H | | $1.00 |
| 1-1/2" REBAR MESH CHAIR (MESHUPS) - MOQ Needed | PL-3060-TMC150 | 2.3"D x 2.3"L x 2.3"W x 2.27"H | CT | $1.00 |
| 2.5 inch Hub Assembly | SJE-1037128 | 2.5"D | MN | $24.00 |
 | Lift Hole Plugs | PL-3046 | 2.5"D x 0.93"H | CT | $822.00 |
 | Cable Weight Mini | SJE-1030356 | 2.5"D x 2.5"L | MN | $9.00 |
| 1" GROMMET - One Unit | PL-3007-GM1 | 2.53"D x 0.75"H | | $8.00 |
| 2" REBAR MESH CHAIR (MESH-UPS) - MOQ Needed | PL-3060-TMC200 | 2.54"D x 2.54"L x 2.54"W x 2.78"H | CT | $1.00 |
| 1-1/4" GROMMET - One Unit | PL-3007-GM125 | 2.75"D x 0.75"H | | $8.00 |
| WHEEL CHAIR 1" LARGE CHANNEL - MOQ Needed | PL-3052-LC | 2.75"D x 1"H | | $1.00 |
| WHEEL CHAIR 1" LOCKING - MOQ Needed | PL-3052-LOK | 2.75"D x 1"H | | $1.00 |
 | Cable Weight | SJE-1002230 | 2.8"D x 3.3"L | MN | $11.00 |
 | 4" X 3" CORRUGATED ADAPTER - One Unit | PL-90860-A43 | 2.81"D x 4.22"L x 3.46"H | | $7.00 |
| 3" REBAR MESH CHAIR (MESH-UPS) - MOQ Needed | PL-3060-TMC300 | 2.81"D x 2.81"L x 2.81"W x 3.98"H | CT | $1.00 |
| 1-1/2" GROMMET - One Unit | PL-3007-GM150 | 3.18"D x 0.75"H | | $9.00 |
| 3" GROMMET - One Unit | PL-3007-GM3 | 3.45"D x 0.75"H | | $11.00 |
 | 4" CORRUGATED PIPE CONNECTOR - One Unit | PL-IT44CC | 3.64"D x 4.5"L x 4.57"H | CT | $10.00 |
| WHEEL CHAIR 1-1/2" COVER - MOQ Needed | PL-30541 | 3.75"D x 1.13"H | | $1.00 |
| WHEEL CHAIR 1-1/2" CLIP-ON - MOQ Needed | PL-30542 | 3.75"D x 1.13"H | | $1.00 |
 | 4" X 4" CORRUGATED ADAPTER - One Unit | PL-90860-V44 | 3.77"D x 4.22"L x 3.89"H | | $8.00 |
 | VERSA-TEE BAFFLE WITH SDR 35 EXT - One Unit | PL-GDS-VT-B35 | 4.09"D x 21.95"H | CT | $33.00 |
| VERSA-TEE BAFFLE WITH SCH 40 EXT - One Unit | PL-GDS-VT-B40 | 4.09"D x 21.95"H | CT | $36.00 |
 | DUAL REBAR CHAIR 1-1/2" & 2" - MOQ Needed | PL-3059-RC1 | 4.13"D x 4.13"L x 4.13"W x 2"H | CT | $1.00 |
 | STACKABLE CHAIR FOR 1-1/2" & 2" COVER - MOQ Needed | PL-3058-SC | 4.14"D x 4.14"L x 4.14"W x 2"H | CT | $1.00 |
| STACKABLE CHAIR FOR 2-1/2" & 3" COVER - MOQ Needed | PL-3059-SC | 4.14"D x 4.14"L x 4.14"W x 3"H | CT | $2.00 |
| 4" GROMMET FOR SDR 35 PIPE - One Unit | PL-3007-GM435 | 4.21"D x 0.75"H | | $13.00 |
 | Polylok Pipe Seals - MOQ Needed | PL-3000 | 4.28"D x 1.68"H | | $3.00 |
 | BAFFLE AND FILTER READY POLYLOK SEAL - MOQ Needed | PL-3020 | 4.28"D x 1.69"H | | $3.00 |
| 4" GROMMET FOR SCH 40 PIPE - One Unit | PL-3007-GM440 | 4.5"D x 0.75"H | | $13.00 |
| DUAL REBAR CHAIR 2-1/2" & 3" - MOQ Needed | PL-3059-RC2 | 4.54"D x 4.54"L x 4.54"W x 3"H | CT | $1.00 |
| WHEEL CHAIR 2" COVER - MOQ Needed | PL-30551 | 4.75"D x 1.25"H | | $2.00 |
| WHEEL CHAIR 2" CLIP-ON - MOQ Needed | PL-30552 | 4.75"D x 1.25"H | | $1.00 |
 | UNIVERSAL READY ADAPTER/BAFFLE/FILTER (POLY II) - MOQ Needed | PL-3021 | 4.9"D x 8.25"L x 1.76"H | | $3.00 |
 | STACKABLE CHAIR SAND PAD - MOQ Needed | PL-3058-SP | 4.91"D x 4.91"L x 4.91"W x 0.58"H | CT | $1.00 |
 | D-BOX MANDREL PLUGS - One Unit | PL-3012 | 5"D x 1.57"H | | $25.00 |
| D-BOX MANDREL PLUGS - MOQ Needed | PL-3012-C | 5"D x 1.57"H | | $24.00 |
| DUAL REBAR CHAIR 3-1/2" & 4" - MOQ Needed | PL-3059-RC3 | 5.03"D x 5.03"L x 5.03"W x 4"H | CT | $2.00 |
 | MAGNETIC MANDREL FOR 2" BOOT - One Unit | PL-3006-MAG | 5.5"D x 3.37"H | | $88.00 |
 | POLYLOK II SEAL - MOQ Needed | PL-3002 | 5.7"D x 1.69"H | | $3.00 |
| DUAL REBAR CHAIR 5" & 5-1/2" - MOQ Needed | PL-3059-RC5 | 5.75"D x 5.75"L x 5.75"W x 5.5"H | CT | $2.00 |
 | 2" CLOSED ENDED BOOT SEAL - MOQ Needed | PL-3006-CE | 5.97"D x 4.31"H | | $13.00 |
 | 2" OPEN ENDED BOOT SEAL - MOQ Needed | PL-3006-OE | 5.97"D x 4.31"H | | $13.00 |
| 36" Lid Riser Combo | N-63830 | 6"D x 36"H | MN, OH, UT, IA, OK, GA, NY, WA, CA, CA | $160.00 |
| UNIVERSAL READY ADAPTER/BAFFLE/FILTER (POLY III) - MOQ Needed | PL-3021-3 | 6.4"D x 8.25"L x 1.73"H | | $4.00 |
| Magnetic Mandrels 3004 - One Unit | PL-3004-MAG | 6.59"D x 4"H | CT | $87.00 |
| WHEEL CHAIR 3" COVER - MOQ Needed | PL-3056 | 6.75"D x 1.62"H | | $3.00 |
| WHEEL CHAIR 3" CLIP-ON - MOQ Needed | PL-30562 | 6.75"D x 1.62"H | | $2.00 |
| MANDREL PLUGS (ADAPTERS) - MOQ Needed | PL-3010-C | 6.8"D x 4"H | | $24.00 |
 | POLYLOK IV OPEN END BOOT SEAL - MOQ Needed | PL-3003-OE | 7.1"D x 4.62"H | | $14.00 |
 | POLYLOK IV CLOSED END BOOT SEAL - MOQ Needed | PL-3003-CE | 7.1"D x 5.62"H | | $16.00 |
| MANDREL FOR 4 OE/CE END BOOT SEAL - One Unit | PL-3004-OE | 7.34"D x 2"H | | $35.00 |
| MANDREL FOR 2" BOOT SEAL - One Unit | PL-3006-M | 7.34"D x 2"H | | $35.00 |
| WHITE MANDREL PLUGS (ADAPTERS) - One Unit | PL-3010 | 7.34"D x 2"H | | $35.00 |
| MANDREL 1" EXT. FOR POLY I/II - One Unit | PL-3010-6 | 7.34"D x 2"H | | $72.00 |
| MANDREL PLUGS (OLD STYLE) - One Unit | PL-3013 | 7.53"D x 5"H | | $48.00 |
| MAGNETIC MANDREL PLUGS (OLD STYLE) - One Unit | PL-3013-MAG | 7.53"D x 5"H | | $88.00 |
| 6" GROMMET FOR SCH 40 PIPE - One Unit | PL-3007-GM6 | 7.7"D x 0.75"H | | $18.00 |
| 6" GROMMET FOR SDR 35 PIPE - One Unit | PL-3007-GM635 | 7.7"D x 0.75"H | | $18.00 |
 | POLYLOK III SEAL - MOQ Needed | PL-3003-B | 7.99"D x 5.04"H | | $12.00 |
| MANDREL PLUG POLY III/VI (ADAPTERS) - MOQ Needed | PL-3022-C | 8.18"D x 3.86"H | | $24.00 |
| MAGNETIC MANDREL PLUG POLY III/VI (ADAPTERS) - One Unit | PL-3022-MAG | 8.18"D x 3.86"H | | $88.00 |
| MANDREL PLUG POLY III/VI (ADAPTERS) - One Unit | PL-3022 | 9.29"D x 2"H | | $25.00 |
| 2" MANDREL EXT POLY III/VI (ADAPTERS) - One Unit | PL-3022-6 | 9.29"D x 2"H | | $25.00 |
| MAGNETIC MANDREL 2" EXTENSION FOR POLY III/VI - One Unit | PL-3022-6MAG | 9.3"D x 2.87"H | | $88.00 |
 | 4 OR 6 CLOSED END BOOT SEAL - MOQ Needed | PL-3005-CE (CASE) | 10.12"D x 8.1"H | | $37.00 |
| 4 OR 6 CLOSED END BOOT SEAL - One Unit | PL-3005-CEH (SINGLE) | 10.12"D x 8.1"H | | $58.00 |
| 23" Lid Riser Combo | N-63831 | 12"D x 23"H | MN, OH, UT, IA, OK, GA, NY, WA, CA, CA | $220.00 |
| 20" Lid & 12"D x 25"H Riser Combination | N-62395 | 20"D | MN, OH, UT, IA, OK, GA, NY, WA, CA | $230.00 |
 | 20" Septic and Water Tank Lid
Ships In 48 Hours | N-62408 | 20"D | MN, OH, UT, IA, OK, GA, NY, WA, CA | $29.00 |
 | 6" Manhole Extension
Ships In 48 Hours | N-63832 | 20"D x 6"H | MN, OH, UT, IA, OK, GA, NY, WA, CA | $140.00 |
 | 15" Manhole Extension
Ships In 48 Hours | N-63833 | 20"D x 15"H | MN, OH, UT, IA, OK, GA, NY, WA, CA | $160.00 |
 | Manhole Extension 20"D x 24"H
Ships In 48 Hours | N-62396 | 20"D x 24"H | MN, OH, UT, IA, OK, GA, NY, WA, CA | $180.00 |