PumpMaster Plus Pump Switch 15PMPDWOP

SJE PumpMaster® Plus

Mechanically-Activated, Wide-Angle Pump Switch

The SJE PumpMaster® Plus pump switch is designed to directly control pumps up to 3/4 HP at 120 VAC and 2 HP at 230 VAC in water and sewage applications.

The SJE PumpMaster® Plus pump switch is not sensitive to rotation or turbulence, allowing it to be used in both calm and turbulent applications.

Features

• Heavy-duty contacts
• Controls pumps up to 3/4 HP at 120 VAC and 2 HP at 230 VAC
• Adjustable pumping range of 7 – 36 inches (18 -91 cm)
• Includes standard mounting clamp and boxed packaging
• SJE PumpMaster® pump switch on/off position diagram

Options:

• For pump up or pump down applications as specified by part number
• With a 120 VAC or 230 VAC piggy-back plug
• Without a plug for direct wiring in 120 VAC or 230 VAC applications
• In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) – longer lengths available

UL Recognized, CSA Certified

Five-Year Limited Warranty

CABLE:

• Flexible 14 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)

FLOAT:

• 3.05 inches diameter x 3.56 inches long (7.75 x 9.04 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 140°F (60°C)

ELECTRICAL:

• 120 VAC 50/60 Hz Single Phase:
• Maximum Pump Running Current: 15 amps
• Maximum Pump Starting Current: 85 amps
• Recommended Pump HP: 3/4 HP or less
• 230 VAC 50/60 Hz Single Phase:
• Maximum Pump Running Current: 15 amps
• Maximum Pump Starting Current: 85 amps
• Recommended Pump HP: 2 HP or less

NOTE: This switch must be used with pumps that provide integral thermal overload protection.