PumpMaster SPDT Pump Switch 30PMSPDTPC

SJE PumpMaster® SPDT

Mechanically-Activated, Wide-Angle Pump Switch Control switches accurately monitor liquid levels to activate pump control panels and alarms.

This mechanically-activated, wide-angle pump switch provides automatic control of pumps in:

• Water
• Sewage applications

It can be wired to work in either pump down (normally open) or pump up (normally closed) applications.

The SJE PumpMaster® SPDT pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

Features

• Can be wired to work in either pump down (normally open) or pump up (normally closed) applications (single pole, double throw)
• Heavy-duty contacts
• Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
• For direct wiring in 120 or 230 VAC applications
• Adjustable pumping range of 7 to 36 inches (18 to 91 cm)
• Includes standard mounting clamp and boxed packaging

UL Listed, CSA Certified

Five-Year Limited Warranty

CABLE:

• Flexible 16 gauge, 3 conductor (UL, CSA) SJOW, water-resistant (CPE)

FLOAT:

• 3.05 inch diameter x 3.56 inch long (7.75 x 9.04 cm) high impact, corrosion resistant, PVC housing for use in sewage and water up to 140°F (60°C)

ELECTRICAL:

120 VAC 50/60Hz Single Phase

• Maximum Pump Running Current:
• 13 amps
• Maximum Pump Starting Current:
• 85 amps
• Recommended Pump HP:
• 1/2 HP or less

230 VAC 50/60Hz Single Phase

• Maximum Pump Running Current
• 13 amps
• Maximum Pump Starting Current
• 85 amps
• Recommended Pump HP
• 1 HP or less

Note: This switch must be used with pumps that provide integral thermal overload protection.